Measurement of attachment force of microbial cells

A parallel-plate flow chamber consisting of two transparent electro-conductive glass plates was constructed. The two glass plates were set parallel to each other and connected to a potentiostat apparatus to regulate the strength of the electric field between the plates. A microbial cell suspension was flowed through the chamber. This system enabled the application of an electrostatic force to suspend charged particles, e.g. microbial cells, existing between the two plates. The time course of the cell attachment of Pseudomonas syringae pv. atropurpurea NIAES 1309 suspended in 10 mM phosphate buffer solution (pH 7.0) to the glass plate was investigated at various electric field strengths ranging from −4.2 to +4.1 V cm⁻¹. The attachment rate and the maximum number of attached cells increased linearly with the increase in the strength of the positive electric field. In contrast, the rate and the number of cells decreased linearly with the decrease in the strength of the negative electric field. These linear relations gave a specific value for the strength of the electric field (−5.9 ± 0.7 V cm⁻¹) where the electrostatic repulsion and the microbial attachment force were thought to be equal, resulting in no cell attachment. From this value, the electrostatic repulsion, i.e. the microbial attachment force, was calculated to be 5.0 × 10⁻¹¹ N cell⁻¹ for cells of average size.     

Bound site of Mo atoms and its local structure in a Mo/HY catalyst characterized by extended X-ray absorption fine structure and density functional calculation

The bound site of Mo atoms and its local structure in a Mo/HY catalyst have been determined by detailed analysis of extended X-ray absorption fine structure (EXAFS). Molybdenum was introduced in the supercage of HY zeolite by cycles of saturated adsorption of Mo(CO)6 at room temperature and subsequent thermal decomposition at 573 K. Two Mo atoms per supercage were immobilized in each CVD-thermal treatment cycle. The Mo loading increased linearly with the cycles up to three cycles at saturation, where six Mo atoms were supported. Temperature-programmed decomposition of the adsorbed Mo(CO)6 was also characterized by GC, QMS, and FT-IR, respectively. The EXAFS analysis including multiple scattering based on theoretical calculations revealed that Mo bound with two oxygen atoms connects to Al, where one of the two oxygen atoms had been associated with a proton. The bound site is called the S(III)' site. The zeolite framework was significantly distorted by the introduction of low-valent Mo, resulting in isolation of the [MoO2Al] unit from the surrounding zeolite framework due to a quasi-disruption of Si-O bonds adjacent to the unit. In the mild oxidation of the low-valent Mo/HY sample two Mo=O bonds were newly formed and the position of Mo was displaced by 0.06 nm so that the distortion of zeolite framework around the Al atom was relieved. The structures were also supported by DFT calculations. This study is the first example that the position of metal cation in zeolite was determined unambiguously by the EXAFS analysis.     

In Situ Processing of Nano Crystalline Oxide Particles/Polymer Hybrid

Nano sized crystalline particles/polymer hybrids were synthesized form designed metal-organic precursors. The newly developed method is composed of the synthesis of organic matrix by polymerization and the in situ nucleation and growth of crystalline oxide particles in the organic matrix below 100°C. The design of metal-organic precursor modified with polymerizable ligand and the selection of reaction conditions does influence the size and crystallinity of ceramic particles in organic matrix. The nano-sized magnetic particle/polymer hybrid exhibits the interesting feature of superparamagnetism and quantum size effect. The crystalline particles of BaTiO₃/, PbTiO₃/, and KNbO₃/polymer hybrids behave to be dielectric and show the typical electro-rheological behavior.     

Synthesis of the proposed structure of plakevulin A: revised structure of plakevulin A

A total synthesis of the proposed structure of plakevulin A was accomplished. However, the NMR spectral data of the synthetic plakevulin A were not identical of those of the reported compound. We next converted the synthetic plakevulin A into 1-dihydrountenone A. The ¹H and ¹³C NMR spectral data of 1-dihydrountenone A were identical with those of reported plakevulin A except for the peaks derived from levulinic acid. Thus, we repurified sample of the natural product and confirmed that the natural sample contained 1-dihydrountenone A and levulinic acid in the ratio of one to one. We also found that not plakevulin A but 1-dihydountenone A possessed the inhibitory activity against mammalian DNA polymerases α and β.     

Diastereoselective synthesis of the 19-epi-C18-C25 segment of (−)-lasonolide A and an unusual inversion at C19

Diastereoselective construction of the 19-epi-C₁₈-C₂₅ segment of (−)-lasonolide A was achieved using a 5-exo-trigonal mode of radical cyclization for the creation of the contiguous quaternary and tertiary stereogenic centers at C₂₂ and C₂₃ as the key reaction step. During the dehydration stage, it was found that an unusual inversion of configuration took place.     

A large thermal hysteresis loop produced by a charge-transfer phase transition in a rubidium manganese hexacyanoferrate

In a rubidium manganese hexacyanoferrate, RbMn[Fe(CN)(6)], the magnetic susceptibility (chi(M)) decreased at 225 K (=T(1/2)decreasing) and abruptly increased at 300 K (=T(1/2)increasing) in the cooling and warming processes, respectively. X-ray photoelectron spectroscopy and infrared spectroscopy indicated that the high-temperature (HT) and low-temperature (LT) phases were composed of Mn(II)-NC-Fe(III) and Mn(III)-NC-Fe(II), respectively. A structural change from cubic (F43m, a = 10.533 A) to tetragonal (I4m2, a = b = 7.090 A, c = 10.520 A) accompanied the phase transition, and, on the basis of these results, the HT and LT phases were assigned to Mn(II)(t(2g)(3)e(g)(2), (6)A(1g); S = (5)/(2))-NC-Fe(III) (t(2g)(5), (2)T(2g); S = (1)/(2)) and Mn(III)(e(g)(2)b(2g)(1)a(1g)(1), (5)B(1g); S = 2)-NC-Fe(II) (b(2g)(2)e(g)(4), (1)A(1g); S = 0), respectively. This phenomenon is caused by a metal-to-metal charge transfer from Mn(II) to Fe(III) and a Jahn-Teller distortion of the produced Mn(III) ion. The reaction mechanism is discussed, considering the entropy difference between the HT and LT phases.     

Solvothermal synthesis of large surface area zirconia

The reaction of zirconium n-propoxide in glycol at 300°C yielded microcrystalline tetragonal zirconia (ZrO₂). The crystallite size of the product depended on the carbon number of the glycol and increased in the following order (carbon number of glycol): 2<6<4, which suggested that the heterolytic cleavage of O-C bond of gylcoxide formed by transesterification is the prime factor for the formation of the product. In toluene, zirconium isopropoxide also gave tetragonal zirconia at 300°C, and zirconium tert-butoxide decomposed at 200°C yielding amorphous zirconia, while zirconium n-propoxide was stable at 300°C. These results suggest that the reaction in toluene depends on the structure of the alkyl group of the alkoxides. Thus-obtained tetragonal zirconias maintained large surface areas (90–160 m²/g) even after calcination at 500°C.     

Two-dimensional network formation of cardiac myocytes in agar microculture chip with 1480 nm infrared laser photo-thermal etching

We have developed a new method that enables agar microstructures to be used to cultivate cells and that allows cell network patterns to be controlled. The method makes use of non-contact three-dimensional photo-thermal etching with a 1480 nm infrared focused laser beam, which is strongly absorbed by water and agar gel, to form the shapes of agar microstructures. It allows microstructures to be easily formed in an agar layer within a few minutes, with cell-culture holes formed by the spot heating of a 100 mW laser and tunnels by the tracing of a 100 microm s(-1), 40 mW laser. We cultivated rat cardiac myocytes in adjacent microstructures and observed synchronized beating in them 90 min after they had made physical contact. Our results indicate that the system can make and use microstructures for cell-network cultivation in a minimal amount of time without any expensive microfabrication facilities or complicated procedures.     

7,10,14-Tri-t-butyl-3-amino-1,8-bisdehydro[14]annulene

Tri-t-butylcarboxybisdehydro[14]annulene was converted by the Curtius reaction into unstable aminoannulene, which could be characterized as N-acetyl derivative. The pK_a-value of the aminoannulene reflects aromatic nature of the annulene nucleus.     

Oxidative transformation of tryptophan to 3-(2-aminophenyl)-2-pyrrolidone and kynurenine

Oxytryptophans 3, which are readily obtained by dye-sensitized photooxygenation of tryptophan followed by acid treatment, undergo a facile N,N′-transacylation to give the 3-(2-aminophenyl)-2-pyrrolidones 4 in the absence of oxygen, whereas in the presence of oxygen 3a was oxidized to kynurenine.